https://idataresearch.com/wp-content/themes/lambda-child-theme/images/footer-logo.png
https://idataresearch.com/wp-content/themes/lambda-child-theme/images/idata-white-logo.png

Orthopedics

Showing 113–128 of 203 results

Spinal Endoscopy Market Analysis | United States | 2019-2025 | MedCore

Spinal endoscopy can be selected for a number of reasons, including observing epidural anatomy and pathology, targeted epidural delivery of drugs and the illumination and visualization of tissues of the epidural space in the spine for assisting diagnosis. More commonly, however, spinal endoscopy is used as a minimally invasive approach to discectomies, laminectomies and foraminotomies.
Spine endoscopes are visualization instruments that allow for a minimally invasive approach to various procedures and resemble other arthroscope and laparoscope devices. By allowing direct visualization into the spinal canal, these endoscopes facilitate the investigation of nerve compression, inflammation, scarring or abnormalities in the spinal space.

more...

MIS Sacroiliac Joint Fusion Market Analysis | United States | 2019-2025 | MedCore

Studies have shown that over 80% of the population will suffer from lower back pain at some point in their lives. A majority of these cases can be attributed to two main causes: general factors, such as muscle strain, injury and overuse; and specific spine conditions such as herniated discs, degenerative disc disease (DDD), spondylolisthesis or spinal stenosis. Sacroiliac (SI) joint dysfunction was once thought to be a less common cause for lower back pain. However, recent studies have shown that SI joint dysfunction (SIJD) may be responsible for up to 30% to 35% of lower back pain.

more...

Spinous Process Fixation Market Analysis | United States | 2019-2025 | MedCore

Several spinal fixation systems exist for stabilizing the spine so that bony fusion can be achieved. The majority of these fixation systems use rods that attach to screws that are threaded into the vertebral bodies or the pedicles. In some cases, plate fixation systems are also used to fuse two adjacent vertebral segments. Current plate fixation systems are designed to function in place of rods and screws, with the advantage of allowing fixation without the need to contour a long rod across multiple segments.

more...

Cervical Fixation Market Analysis | United States | 2019-2025 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. Spinal fusion is primarily used for eliminating or significantly reducing the pain caused from the abnormal movement of the vertebrae. Supplemental bone tissue, either autograft or allograft, is used for promoting bone tissue growth. A union of two vertebral bodies is referred to as a single-level fusion. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented cervical fusions incorporate fixation devices to secure and stabilize the fusion site and interbody devices to fill the intervertebral disc space as well as enhance and promote fusion. Non-instrumented fusions use bone tissue to promote growth, but do not incorporate any implant devices into the procedures. Markets for interbody devices, including those used in the cervical region of the spine, are discussed in a subsequent chapter. All procedures and markets in this analysis are instrumented fusions because they involve the implantation of plates, screws, rods, wiring or cable fixation devices.

more...

Interbody Devices Market Analysis | United States | 2019-2025 | MedCore

Interbody (IB) devices are designed to replace the intervertebral discs of the spine, which enhances stability in the region and promotes fusion between the two vertebral bodies. These devices are threaded, allowing them to be used in conjunction with bone graft material. Over time, the packed graft is gradually replaced by natural bone, forming a solid piece. IB fusion procedures typically add a posterior fixation device to the associated level. These procedures are often referred to as 360° fusions, as surgeons will implant interbody devices from an anterior approach and flip the patient over to implant a posterior pedicle screw device. This combination increases the fusion success rate over an interbody fusion device implantation without the addition of fixation devices.

more...

Motion Preservation Devices Market Analysis | United States | 2019-2025 | MedCore

Motion preservation devices are an exciting and often controversial segment of the spinal implant market. These devices are used for treating pathologies similar to those that spinal fusion procedures address. However, unlike spinal fusion, motion preservation devices act to preserve the natural motion of the spine. Some motion preservation devices are used for treating pathologies that were previously untreatable with traditional fusion procedures, thus creating new markets for spinal implants.

more...

Spinal Electrical Stimulation Market Analysis | United States | 2019-2025 | MedCore

Electrical stimulation devices are used for stimulating bone growth after a spinal fusion procedure. Spinal electrical bone growth stimulators are often used as an adjunct therapy in order to increase the chance of a successful solid spinal fusion. In the United States, electrical stimulation devices are designed specifically for lumbar and cervical fusions. However, some lumbar devices have historically been used off-label to augment the healing process for cervical fusion procedures.

more...

Spinal Surgery Instrumentation Market Analysis | United States | 2019-2025 | MedCore

Spinal instrumentation is used to stabilize the spine during fusion procedures, typically by lessening the pressure put on the spine until successful fusion has occurred. This ensures that bone growth does not occur in a way which further impedes proper movement, and that growth is as efficient as possible. As a category, spinal instrumentation includes a wide variety of products, including fixation products discussed in the cervical and thoracolumbar fixation segments of this report.

more...

Thoracolumbar Fixation Market Analysis | United States | 2019-2025 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. Spinal fusion is primarily used for eliminating or significantly reducing the pain caused by abnormal movement of the vertebrae through immobilization. Supplemental bone tissue, either autograft or allograft, is used for promoting bone tissue growth. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented fusions incorporate fixation devices to secure and stabilize the fusion site and interbody devices to fill the intervertebral disc space as well as enhance and promote fusion. Non-instrumented fusions use bone tissue to promote growth but do not incorporate any implant devices into the procedures. Interbody device markets, including those used in the thoracolumbar region of the spine, are discussed in a subsequent chapter. All procedures and markets in this analysis are instrumented fusions because they involve the implantation of plates, screws, rods, wiring or cable fixation devices.

more...

Vertebral Compression Fracture Market Analysis | United States | 2019-2025 | MedCore

A vertebral compression fracture (VCF) occurs when the bone tissue of the vertebral body collapses in the spine. There are various causes of VCFs, but the most common is osteoporosis. Typically, the lumbar region of the spine is affected, resulting in the anterior section of the vertebral body collapsing. This can cause the spine to tilt forward. In multi-level cases, kyphosis (hunchback of the spine) can result from a VCF. In addition, VCFs can result from malignancy, infection or trauma to the spine.

more...

Orthopedic Bone Graft Substitutes Market Analysis | United States | 2019-2025 | MedCore

Bone is a biologically active tissue and will regenerate whenever possible; however, there are instances where the damage is significant enough to warrant a scaffold to help rejoin the fissure or cavity. Bone grafting is a surgical procedure in which damaged bone is replaced with autograft tissue, allograft tissue or a bone graft substitute, which can be either synthetic or metal.
During an autograft procedure, tissue is harvested from the patient’s iliac crest, or possibly the distal femur or proximal tibia, and placed at the injury site. An allograft procedure uses donated cadaveric tissue. A grafting procedure using a bone graft substitute replaces human tissue with a synthetic or metal material. For the purposes of this report, metal replacement materials will be excluded, as they are not considered biomaterials.

more...

Cellular Allografts Market Analysis | United States | 2019-2025 | MedCore

Cellular allografts consist of allograft bone combined with adipose derived mesenchymal stem cells; or may refer to HCT/P (Human Cells, Tissues, and Cellular and Tissue-based Product) comprised of viable cells within a cortical cancellous bone matrix. The viable cell bone matrix (VCBM) is a cryopreserved cancellous bone combined with demineralized cortical bone matrix. Their key characteristic in regards to bone repair is that they provide osteogenic properties.

more...

Orthopedic Cartilage Repair Market Analysis | United States | 2019-2025 | MedCore

Cartilage is a connective tissue that lines the ends of bones. It provides shock absorption within the joint and prevents abrasion from occurring to the articular surfaces of bone. Cartilage, in its various forms, is found in intervertebral discs, as the articular lining for joint surfaces and in the meniscal pads of the knees. All types of cartilage are poorly vascularized and, as proper healing requires adequate blood flow, are some of the slowest healing tissues of the body.
Osteoarthritis is cumulative trauma that eventually wears away at cartilaginous surfaces, exposing the underlying bone to additional wear. There are few alternatives for osteobiologic cartilage repair. Damage to cartilage is difficult to treat because the tissue lacks blood supply and has limited capacity for self-repair.

more...

Orthopedic Cell Therapy Market Analysis | United States | 2019-2025 | MedCore

The scope of the orthopedic cell therapy market in this report covers platelet-rich plasma and concentrated bone marrow aspirate.
The platelet and bone marrow concentration market consists of centrifuge equipment that separates and concentrates platelets and cells based on their various densities. The majority of companies participating in this market provide the centrifuges on loan and sell only the disposable components, such as the spin buckets. Typically, one bucket is required per procedure.

more...

Orthopedic Growth Factor Market Analysis | United States | 2019-2025 | MedCore

Growth factors are a group of small, soluble proteins that bind onto cell surface receptors, triggering a series of signals that regulate the body’s ability to grow, renew and heal. Due to the regenerative properties of growth factors, they have been exploited for bone healing in orthopedic applications. Since September 1, 2015, there are two main growth factor products offered in the U.S. market: INFUSE® by Medtronic and AUGMENT® by Wright Medical. Stryker’s OP-1™ which had been sold to Olympus Biotech is no longer available as Olympus Biotech ceased sales May 31, 2014. Stryker’s OP-1™ is a different form of bone morphogenic proteins (BMPs) that belong to a larger family of proteins called transforming growth factors.

more...

Spinal Machined Bone Allograft Market Analysis | United States | 2019-2025 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. It is primarily used for eliminating or significantly reducing the pain caused by abnormal movement of the vertebrae by immobilizing them. Supplemental bone tissue, either autograft or allograft, is used for promoting bone growth. A union of two vertebral bodies is referred to as a single-level fusion. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented fusions incorporate fixation devices to secure and stabilize the fusion site, and interbody devices are used for filling the intervertebral disc space to enhance and promote fusion. Non-instrumented fusions utilize bone tissue to promote growth, but do not incorporate any implant devices into the procedures.

more...