https://idataresearch.com/wp-content/themes/lambda-child-theme/images/footer-logo.png
https://idataresearch.com/wp-content/themes/lambda-child-theme/images/idata-white-logo.png

Orthopedics

Showing 17–32 of 220 results

Disposable Cannulas Market Analysis | United States | 2019-2025 | MedCore

Disposable cannulas are used in many arthroscopic procedures to aid in keeping the site of incision open and accessible. Once a cannula is inserted into the site of incision, other arthroscopic instruments are then passed through the cannula, allowing for enhanced access to the joint being operated on. Their role as an access instrument is mainly in difficult-to-access joints such as shoulder and hip and are not typically used for knee procedures. When disposable cannulas are used in easier-to-access joints like the knee, their function is more for fluid management and distention. The cannulas used in hip arthroscopies tend to be longer to allow for easier access into the hip joint. Several companies offer hip cannulas as part of an access instrumentation kit, which is either sold separately or with a hip arthroscope.

more...

Drill Guide Systems and Disposables Market Analysis | United States | 2019-2025 | MedCore

Drill guides are used during the reconstruction of the ACL and PCL. As the name implies, these devices are used for properly aligning the drill bit for the precise creation of tunnels and holes in boney surfaces. The knee is one of the most susceptible joints to pressure and injury in the human body, as its bending capacity is determined by a complex interaction of rotational and extensional movements. The anterior and posterior cruciate ligaments (ACL/PCL) connect the bones that form the knee and stabilize joint movements to prevent the femur from sliding against the tibia and vice versa.
Injuries to the ACL are quite common. These injuries can be caused by excessive use, physical impact or wear over time. Usually, during ACL/PCL reconstruction, the surgeon drills holes in the tibia in order to hold harvested patellar tendon with fixation devices such as staples and screws, thus reconstructing the ligament.

more...

Arthroscopes Market Analysis | United States | 2019-2025 | MedCore

Arthroscopes are visualization instruments that allow for minimally invasive joint surgeries by enabling the surgeon to see into the joint. In this chapter, the video cameras in the arthroscopes are not included or discussed. The types of procedures that are typically performed with arthroscopes include joint debridement, microfracture repair, ligament reconstruction and diagnostic imaging. The first generation of arthroscopes utilized a variant of miniature-camera technology that was adapted for medical applications. The later adoption of fiber-optic technology in medicine allowed for arthroscopes to become smaller and more efficient.

more...

Arthroscopic Hand Instruments Market Analysis | United States | 2019-2025 | MedCore

Hand instruments are mostly non-disposable, unpowered, metallic instruments that are used as hand tools for surgery. These include, but are not limited to, graspers, knives, probes, punches, scissors, scissor punches, dissectors and shears.
Each of these tools comes in a variety of configurations and geometries to suit surgeon preference and surgical need. Because hand instruments are essentially a commodity market, the key differentiating factors are ergonomics and surgeon preference. Hand instruments are often sold as part of a complete package of devices for the treatment of a specific indication, such as anterior cruciate ligament reconstruction or rotator cuff repair. More recently, they are becoming available for hip arthroscopy and small joint repair.

more...

Knee Implant Market Analysis, Size, Trends | Global | 2018-2024 | MedCore

Industry Trends The long-term growth of the market will be strongly driven by the increasing demand for revision surgeries. The revision knee implant segment is the fastest growing of the overall knee replacement device market. The growth rate will continue to increase, which can be attributed to the rise in younger knee implant patients. Since

more...

Arthroscopy Market Analysis, Size, Trends | United States | 2019-2025 | MedSuite (Includes 11 Reports)

The full report suite on the U.S. market for arthroscopic devices includes arthroscopes, disposable cannulas, hand instruments, fluid management disposables, shaver blades, radiofrequency (RF) probes, drill guide systems and disposables and suture passers. Power instruments are covered in an appendix.

more...

Radiofrequency Probes Market Analysis | United States | MedCore

Radiofrequency (RF) probes use a form of electrothermal energy to cut, ablate and shrink damaged tissue. By these means, disruption and blood loss of the surrounding tissue is reduced compared to physical cutting. Because RF technology operates at a lower temperature than other comparable methods, the surrounding healthy tissue is less likely to be damaged.

more...

Trauma Devices Market Analysis, Size, Trends | Global | 2019-2025 | MedSuite

Industry Trends One of the major drivers of the trauma devices market is the consistent influx of newer technologies. For example, within the largest segment of this market, plates and screws, the market growth is supported by the introduction of newer materials (i.e. titanium), hybrid systems and anatomical plates. In addition, intramedullary (IM) nails are

more...

Minimally Invasive Spine Surgery Market Analysis, Size, Trends | Global | 2019-2025 | MedSuite

Industry Trends The global minimally invasive spine surgery market (MIS) is considered by many to be the most exciting and controversial segment of the orthopedics industry. This market has traditionally been a segment of the orthopedics market but, due to rapid growth and a large market size, many manufacturers view spine as a key business

more...

Spinal Implants Market Analysis, Size, Trends | Global | 2019-2025 | MedSuite

Industry Trends Despite many challenges, growth is expected in many market segments, as the patient demographics in the U.S. maintain a steady demand for such procedures. Growth has slowed in the last few years as newer, minimally invasive innovations gradually cannibalized the traditional spine market. The VCF segment will be the fastest growing in the

more...

Orthobiologics Market Analysis, Size, Trends | Europe | 2019-2025 | MedSuite (Includes 6 Reports)

Constraints on reimbursements will continue to limit the European orthobiologics market. Presently, only a few premium products under the umbrella of pharmaceuticals are reimbursed by the government or healthcare organizations in the European region. In addition to not being as well-received as reimbursed products, the lack of reimbursement drives pricing down, hinders innovation and discourages

more...

Minimally Invasive Spine Surgery Market Analysis, Size, Trends | United States | 2019-2025 | MedSuite (Includes 9 Reports)

Overall, the U.S. minimally invasive spinal implants market was valued at $1.8 billion in 2018. This is expected to increase over the forecast period at a CAGR of 3.3% to reach $2.26 billion by 2025. One of the key drivers for the MIS spinal device market is the increase in the target population, which is

more...

Spinal Implants Market Analysis, Size, Trends | United States | 2019-2025 | MedSuite (Includes 10 Reports)

Overall, the United States spinal implants market was valued at $6.05 billion in 2018. This is expected to increase over the forecast period at a CAGR of 1.0% to reach $6.5 billion in 2025. Despite many challenges, growth is expected in many market segments, as the patient demographics in the U.S. maintain a steady demand

more...

Foot and Ankle Devices Market Analysis, Size, Trends | Global | 2019-2025 | MedCore

Industry Trends Foot and ankle medical devices are used to treat a variety of indications, including hallux rigidus, arthritis, Lisfranc fractures and pes planus (flatfeet) to name a few. The devices included in this study are those for the ankle joint, hindfoot, midfoot and forefoot and toe digits. Ankle devices, which include total ankle replacements,

more...

Small Bone and Joint Devices Market Analysis, Size, Trends | Global | 2019-2025 | MedSuite

Industry Trends The overall small bone and joint market is anticipated to grow moderately over the forecast period. The maturity of the orthopedic hip and knee device markets has prompted investment and growth within the extremity markets. The extremity markets are relatively young and the dominance of arthroplasty over fusion has yet to become standard fare.

more...

Small Bone and Joint Devices Market Analysis, Size, Trends | United States | 2019-2025 | MedSuite (Includes 10 Reports)

The full report suite on the U.S. market for small bone and joint orthopedic devices includes shoulder reconstruction devices, elbow repair devices, hand & wrist devices and foot & ankle devices. This report also includes plate & screw devices, staple fixation devices and external fixation devices markets.

more...