Multi-Parameter Vital Signs Monitoring Market Analysis | Europe | 2016-2022 | MedCore

  • Year: 2016
  • Scope: 2012-2022
  • Region: Europe
  • Pages: 91
  • Published Date: 6/1/2016
  • Type: MedCore

Nearly all patients within critical care units, operating theaters, recovery and step down wards are monitored by multi-parameter devices. Since almost all patients within these medical departments undergo acute procedures, it is vital that their physiological states are monitored. Moreover, multi-parameter monitoring devices are used in hospital neonatal and pediatric units as well as alternate care facilities. Monitoring enables clinicians and other healthcare professionals to respond quickly, efficiently and accurately to changes in a patient’s vital signs and other bodily processes in order to prevent future complications or even death. In less critical areas, multi-parameter devices are becoming increasingly used for improving the accuracy of a medical professional’s judgment and for helping anticipate the patient’s changing condition. Multi-parameter devices are becoming more commonly found in emergency rooms (ER) and general ward areas. A multi-parameter device’s functions range from 2 to 12 parameter depending on device acuity level. Low-acuity devices are generally able to monitor one to five parameters and high-acuity devices are able to monitor six to 12 parameters. In general, hard-wired multi-parameter monitoring devices can either be configured or modular. Low-acuity devices are generally configured, as they are designed to monitor specific parameters and are less flexible than modular devices. Modular devices may have a configured component built-in upon purchase, and SpO2 units from Masimo or Nellcor (Medtronic) were the most popular. However, the dominant characteristic of these devices is their set of interchangeable ports that allow parameter modules to be plugged in and incorporated into the monitoring process. Patient-worn telemetry devices, which are also referred to as ambulatory telemetry devices, have traditionally been used for monitoring one or two parameters. However, recent advancements have enabled these devices to monitor, on average, three to four parameters. A typical device would exhibit a combination of all or some of the parameters listed below. Additionally, other options included in the table below are features that are often available but are not the main function of the device. The average lifespan of a multi-parameter monitoring device is nine years; however, software updates may occur more frequently depending on the rate of technological advancement. Monitors are known to be used for as long as fifteen years, when there is no budget for capital equipment.

The "European Market Report Suite for Patient Monitoring Equipment 2016 - MedSuite" includes analysis on the following companies currently active in this market:
Ambu Ltd.
Atys Medical
B Braun
Boston Scientific
Cheetah Medical
Deltex Medical
Docobo Ltd
Dräger Medical
Edan Instruments
Edwards Lifesciences
Entra Health
Fold Group
Fukuda Denshi
GE Healthcare
ICU Medical,
Medifit Instruments Ltd
Medlab GmbH
Mindray Medical
Mortara Instruments
Natus Medical
Nihon Kohden
Nonin Medical
OBS Medical
Omega Critical Care
Philips Healthcare
Pulsion Medical
RSL Steeper
SIGMA Medizin-Technik
Sorin (Livanova)
Spacelabs Healthcare
Spacelabs Healthcare
Spes Medica
St. Jude Medical
TBS Group
Technomed Europe
Teleflex Medical
Vytech Health
Welch Allyn
Zoe Medical Inc.

*Not all companies are currently active in every segment or sub-report from this suite. For more details contact an iData Research Product Advisor.

iData’s 9-Step Research Methodology

Our reports follow an in-depth 9-step methodology which focuses on the following research systems:

  • Original primary research that consists of the most up-to-date market data
  • Strong foundation of quantitative and qualitative research
  • Focused on the needs and strategic challenges of the industry participants

Step 1: Project Initiation & Team Selection During this preliminary investigation, all staff members involved in the industry discusses the topic in detail.

Step 2: Prepare Data Systems and Perform Secondary Research The first task of the research team is to prepare for the data collection process: Filing systems and relational databases are developed as needed.

Step 3: Preparation for Interviews & Questionnaire Design The core of all iData research reports is primary market research. Interviews with industry insiders represent the single most reliable way to obtain accurate, current data about market conditions, trends, threats and opportunities.

Step 4: Performing Primary Research At this stage, interviews are performed using contacts and information acquired in the secondary research phase.

Step 5: Research Analysis: Establishing Baseline Estimates Following the completion of the primary research phase, the collected information must be synthesized into an accurate view of the market status. The most important question is the current state of the market.

Step 6: Market Forecast and Analysis iData Research uses a proprietary method to combine statistical data and opinions of industry experts to forecast future market values.

Step 7: Identify Strategic Opportunities iData analysts identify in broad terms why some companies are gaining or losing share within a given market segment.

Step 8: Final Review and Market Release An integral part of the iData research methodology is a built-in philosophy of quality control and continuing improvement is integral to the iData philosophy.

Step 9: Customer Feedback and Market Monitoring iData philosophy of continuous improvement requires that reports and consulting projects be monitored after release for customer feedback and market accuracy.

Click Here to Read More About Our Methodology