https://idataresearch.com/wp-content/uploads/2016/04/ReportIcon-PatientMonitoring-MC.jpg

Fetal and Neonatal Monitoring Market Analysis | Global | 2016-2022 | MedCore

Conventional antepartum fetal monitoring was performed mostly through the mother’s experience and judgment of fetal movements. Heart sounds were monitored through a fetal stethoscope as well. As technology evolved within this market, phonocardiographs (PCG), with the use of sensors, were developed to electronically monitor fetal heart rate (FHR) at a more accurate level. Antepartum monitoring includes non-stress tests as well as the contraction stress tests. The main purpose of intrapartum fetal monitoring is to monitor FHR in order to assess brain injury. Antepartum monitoring may occur in the hospital or private practice setting. Intrapartum monitoring during labor is important as severe complications such as brain damage can occur. This type of monitoring occurs in the hospital labor ward. A cardiotocograph (CTG) monitors FHR, beat-to-beat, as well as uterine contractions in order to properly monitor for brain injury. This technique utilizes ultrasound probes or an external contraction sensor. Invasive techniques allow the physician direct exposure to intra-uterine pressure, and are performed using a catheter-tipped pressure sensor or an external transducer connected to a water-filled cannula. Monitors with ST waveform analysis capabilities allow physicians to analyze fetal electrocardiographs (ECG) in addition to heart rate. Neonatal monitoring includes high-acuity neonates that are typically monitored in a neonatal intensive care unit (NICU). Neonate patients most commonly result from premature births and require access to specialized equipment and resources such as temperature support, feeding, respiratory assistance and isolation to prevent infection. Neonatal monitors are standard high-acuity monitors that employ specialized algorithms, different alarm limits and measurements as well as an event and alerting packages specific to neonates. In less critical cases, neonate patients may be monitored in low-acuity settings, often using pulse oximetry. Both fetal and neonatal monitoring may be done invasively and non-invasively. Each method has advantages and disadvantages. Invasive methods for fetal monitoring have traditionally been used and are able to directly reveal genetic abnormalities in the fetus. Invasive monitoring is often believed to be more accurate than non-invasive methods; however, complications can occur. Invasive techniques may cause damage to fetal and maternal tissues, as well as trauma, pain and in some cases, miscarriage. The advantages of non-invasive techniques are significant ranging from decreased trauma, pain and tissue damage, to lower costs for patients. Neonatal monitoring is shifting toward more non-invasive methods. Due to small patient size, invasive techniques are usually harmful and damaging to the patient. Recent advances in monitoring technologies allow for a greater number of physiological parameters to be monitored non-invasively such as blood gas, cerebral blood flow, EEG, end tidal CO2 and biochemical characteristics.
 

FREE Sample Report

This global report on Fetal and Neonatal Monitoring is a bundling of MedCores and specific sections of other regional MedSuites. Please view them to see the Table of Contents, Figures and Charts.
European Market Report for Fetal and Neonatal Monitoring 2016 - MedCore
Asia-Pacific Markets for Patient Monitoring Devices and Equipment 2014 (5 countries) (Forecasted to 2020) – MedSuite
US Market for Patient Monitoring Equipment 2014 – MedSuite
Philips Healthcare GE Healthcare Dräger Medical Huntleigh Mindray Medical Neoventa Edan Instruments
This global report on Fetal and Neonatal Monitoring is a bundling of MedCores and specific sections of other regional MedSuites. Please view them to see the Table of Contents, Figures and Charts.
European Market Report for Fetal and Neonatal Monitoring 2016 - MedCore
Asia-Pacific Markets for Patient Monitoring Devices and Equipment 2014 (5 countries) (Forecasted to 2020) – MedSuite
US Market for Patient Monitoring Equipment 2014 – MedSuite
This global report on Fetal and Neonatal Monitoring is a bundling of MedCores and specific sections of other regional MedSuites. Please view them to see the Table of Contents, Figures and Charts.
European Market Report for Fetal and Neonatal Monitoring 2016 - MedCore
Asia-Pacific Markets for Patient Monitoring Devices and Equipment 2014 (5 countries) (Forecasted to 2020) – MedSuite
US Market for Patient Monitoring Equipment 2014 – MedSuite

iData’s 9-Step Research Methodology

Our reports follow an in-depth 9-step methodology which focuses on the following research systems:

  • Original primary research that consists of the most up-to-date market data
  • Strong foundation of quantitative and qualitative research
  • Focused on the needs and strategic challenges of the industry participants

Step 1: Project Initiation & Team Selection During this preliminary investigation, all staff members involved in the industry discusses the topic in detail.

Step 2: Prepare Data Systems and Perform Secondary Research The first task of the research team is to prepare for the data collection process: Filing systems and relational databases are developed as needed.

Step 3: Preparation for Interviews & Questionnaire Design The core of all iData research reports is primary market research. Interviews with industry insiders represent the single most reliable way to obtain accurate, current data about market conditions, trends, threats and opportunities.

Step 4: Performing Primary Research At this stage, interviews are performed using contacts and information acquired in the secondary research phase.

Step 5: Research Analysis: Establishing Baseline Estimates Following the completion of the primary research phase, the collected information must be synthesized into an accurate view of the market status. The most important question is the current state of the market.

Step 6: Market Forecast and Analysis iData Research uses a proprietary method to combine statistical data and opinions of industry experts to forecast future market values.

Step 7: Identify Strategic Opportunities iData analysts identify in broad terms why some companies are gaining or losing share within a given market segment.

Step 8: Final Review and Market Release An integral part of the iData research methodology is a built-in philosophy of quality control and continuing improvement is integral to the iData philosophy.

Step 9: Customer Feedback and Market Monitoring iData philosophy of continuous improvement requires that reports and consulting projects be monitored after release for customer feedback and market accuracy.

Click Here to Read More About Our Methodology