https://idataresearch.com/wp-content/themes/lambda-child-theme/images/footer-logo.png
https://idataresearch.com/wp-content/themes/lambda-child-theme/images/idata-white-logo.png

Orthopedics

Showing 33–48 of 114 results

Thoracolumbar Fixation Market Analysis | Europe | 2017-2023 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. Spinal fusion is primarily used for eliminating or significantly reducing the pain caused by abnormal movement of the vertebrae through immobilization. Supplemental bone tissue, either autograft or allograft, is used for promoting bone tissue growth. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented fusions incorporate fixation devices to secure and stabilize the fusion site and interbody devices to fill the intervertebral disc space as well as enhance and promote fusion. Non-instrumented fusions use bone tissue to promote growth but do not incorporate any implant devices into the procedures. Interbody device markets, including those used in the thoracolumbar region of the spine, are discussed in a subsequent chapter. All procedures and markets in this analysis are instrumented fusions because they involve the implantation of plates, screws, rods, wiring or cable fixation devices.

more...

Spinal Vertebral Compression Fracture Market Analysis | Europe | 2017-2023 | MedCore

A vertebral compression fracture (VCF) occurs when the bone tissue of the vertebral body collapses in the spine. There are various causes of VCFs, but the most common is osteoporosis. Typically, the lumbar region of the spine is affected, resulting in the anterior section of the vertebral body collapsing. This can cause the spine to tilt forward. In multi-level cases, kyphosis (hunchback of the spine) can result from a VCF. In addition, VCFs can result from malignancy, infection or trauma to the spine.

more...

Spinal Electrical Stimulation Devices Market Analysis | Europe | 2017-2023 | MedCore

Electrical stimulation devices are used for stimulating bone growth after a spinal fusion procedure. Spinal electrical bone growth stimulators are often used as an adjunct therapy in order to increase the chance of a successful solid spinal fusion. In the United States, electrical stimulation devices are designed specifically for lumbar and cervical fusions. However, some lumbar devices have historically been used off-label to augment the healing process for cervical fusion procedures.

more...

Spinal Surgery Instrumentation Market Analysis | Europe | 2017-2023 | MedCore

Spinal instrumentation is used to stabilize the spine during fusion procedures, typically by lessening the pressure put on the spine until successful fusion has occurred. This ensures that bone growth does not occur in a way which further impedes proper movement, and that growth is as efficient as possible. As a category, spinal instrumentation includes a wide variety of products, including fixation products discussed in the cervical and thoracolumbar fixation segments of this report.

more...

Spinal Interbody Devices Market Analysis | Europe | 2017-2023 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. It is primarily used for eliminating or significantly reducing the pain caused by abnormal movement of the vertebrae by immobilizing them. Supplemental bone tissue, either autograft or allograft, is used for promoting bone growth. A union of two vertebral bodies is referred to as a single-level fusion. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented fusions incorporate fixation devices to secure and stabilize the fusion site, and interbody devices are used for filling the intervertebral disc space to enhance and promote fusion. Non-instrumented fusions utilize bone tissue to promote growth, but do not incorporate any implant devices into the procedures.

more...

Spinal Motion Preservation Devices Market Analysis | Europe | 2017-2023 | MedCore

Motion preservation devices are an exciting and often controversial segment of the spinal implant market. These devices are used for treating pathologies similar to those that spinal fusion procedures address. However, unlike spinal fusion, motion preservation devices act to preserve the natural motion of the spine. Some motion preservation devices are used for treating pathologies that were previously untreatable with traditional fusion procedures, thus creating new markets for spinal implants.

more...

Cervical Fixation Market Analysis | Europe | 2017-2023 | MedCore

Spinal fusion is a surgical procedure designed to combine two or more vertebrae together, eventually forming a fused bone. Spinal fusion is primarily used for eliminating or significantly reducing the pain caused from the abnormal movement of the vertebrae. Supplemental bone tissue, either autograft or allograft, is used for promoting bone tissue growth. A union of two vertebral bodies is referred to as a single-level fusion. Fusion is accomplished by using either an instrumented or non-instrumented surgical approach. Instrumented cervical fusions incorporate fixation devices to secure and stabilize the fusion site and interbody devices to fill the intervertebral disc space as well as enhance and promote fusion. Non-instrumented fusions utilize bone tissue to promote growth, but do not incorporate any implant devices into the procedures. Markets for interbody devices, including those used in the cervical region of the spine, are discussed in other reports. All procedures and markets in this analysis are instrumented fusions because they involve the implantation of plates, screws, rods, wiring or cable fixation devices.

more...

Orthopedic Soft Tissue Repair Procedure Volume Analysis | United States | 2020-2026 | MedPro

The full report suite on the U.S. market for orthopedic soft tissue repair includes tendon reinforcement grafts, suture anchors, tenodesis screws, ACL/PCL replacement allografts, interference screws, intratunnel fixation devices, cortical fixation devices, cross-pins, washer and post, osteochondral allografts, meniscal allografts, autologous chondrocyte implantation, particulated juvenile allograft implant, microfracture adjunct, suture meniscal repair devices, implant meniscal repair devices, hybrid meniscal repair devices, hip radiofrequency probes, banana blades, hip access kits and disposable suture passers.

more...

Tendon Graft Reinforcement Market Analysis | United States | 2020-2026 | MedCore

Tendons have been traditionally repaired with the surgical use of suture anchoring technology to rejoin a torn tendon directly. One issue with traditional tendon repair is the incidence of re-tearing previously operated injuries. This predominantly occurs following procedures involving the repair of the shoulder’s rotator cuff tendons and the ankle’s Achilles tendon.

more...

Rotator Cuff Repair Market Analysis | United States | 2020-2026 | MedCore

The rotator cuff is a combination of four muscles and their tendons that cover the head of the humerus. These include the supraspinatus, infraspinatus, teres minor and subscapularis muscles. These muscles stabilize the ball of the shoulder within the joint and enable the arm to lift and rotate. The shoulder joint allows for a great range of motion, but at the expense of stability, as it is not directly attached to the axial skeleton in the way that the lower limbs are.

more...

Shoulder Labrum Repair Market Analysis | United States | 2020-2026 | MedCore

The labrum is a ring of cartilage that circles the end of the shoulder blade (the glenoid). This stabilizes the shoulder joint and allows for a wide range of movement. A common type of labral tear is the SLAP lesion, which is an acronym for “superior labral anterior to posterior.”

more...

Hip Arthroscopy Market Analysis | United States | 2020-2026 | MedCore

The hip is a ball and socket joint, with the head of the femur constituting the ball. This articulates with the acetabular fossa, which is the socketed surface of the pelvis. The arrangement allows for a wide degree of motion, but not as much as in the shoulder, which is the other ball and socket joint of the body. The junction between the femur and acetabulum is covered with a thick layer of hyaline articular cartilage that protects the bones from wear and tear. For additional support, the acetabulum is lined with a fibrocartilaginous material referred to as the acetabular labrum. The labrum is susceptible to tears most often resulting from sports injuries that trigger femoral acetabular impingement (FAI). Thus, hip arthroscopy is generally performed in young athletic patients.

more...

Meniscal Repair Market Analysis | United States | 2020-2026 | MedCore

The meniscus is a crescent-shaped pad of fibrocartilage located between the femur and the tibia. It acts as a shock absorber and prevents friction between the two bones. It also helps stabilize the knee along with the ligaments and protects the articular cartilage of the knee, aiding in the prevention of degenerative arthritis.

more...

Biceps Tenodesis Repair Market Analysis | United States | 2020-2026 | MedCore

The tendon on the long head of the bicep attaches the bicep muscle to the top of the glenoid fossa. Most bicep tendon injuries occur at the long head due to its proximity to the rotator cuff and the acromion. When the elbow is straight, this long head tendon acts as a secondary stabilizer of the shoulder and therefore strenuous and repeated overhead movements can lead to injury or tearing of the tendon. It is possible for patients to live with a bicep tendon injury or tear but as the level of discomfort increases or the level of functionality decreases, a surgical procedure is necessary.

more...

ACL/PCL Fixation Devices Market Analysis | United States | 2020-2026 | MedCore

There are several different graft options that can be used for anterior cruciate ligament/posterior cruciate ligament (ACL/PCL) reconstruction procedures. One of the most traditional methods is the use of bone-to-bone (BTB) grafts, where the ends of the graft contain bone that is then fixed to the femoral and tibial tunnels. The other option for surgeons is to use soft tissue grafts (either hamstring or quadriceps tendon) that require the soft tissue to be fixed to the tibial and femoral bone. For procedures using BTB grafts, only interference screws are used for anchoring the tendon or ligament of the graft to the bone. In contrast, for procedures that use soft tissue grafts, a variety of other devices are available to fixate the graft to the femoral and tibial tunnels. For every ACL/PCL repair procedure, both the tibia and femur are involved in fixating the new tissue between these two bones. Fixation to the tibia differs from femoral fixation with respect to the devices used and thus the ACL/PCL fixation market is composed of the tibial fixation and femoral fixation segments.

more...

ACL/PCL Reconstruction Devices Market Analysis | United States | 2020-2026 | MedCore

The knee is the most susceptible joint to pressure and injury in the human body, as its bending capacity is a result of complex interactions of rotational and extensional movements. The anterior and posterior cruciate ligaments (ACL/PCL) connect the bones that form the knee, stabilizing joint movements and preventing the femur from sliding against the tibia and vice versa. Injuries to the ACL are quite common. These injuries can be caused by excessive use, physical impact or wear over time. Usually, during ACL/PCL reconstruction, the surgeon drills holes in the tibia in order to hold harvested patellar tendon with fixation devices such as staples and screws, thus reconstructing the ligament.

more...