https://idataresearch.com/wp-content/themes/lambda-child-theme/images/footer-logo.png
https://idataresearch.com/wp-content/themes/lambda-child-theme/images/idata-white-logo.png

Dental

Showing 17–32 of 55 results

Inlays and Onlays Market Analysis | United States | 2018-2024 | MedCore

Inlays and onlays are referred to as partial crowns because they are only used when tooth damage is not severe enough to warrant crown restoration. They are the least prevalent form of dental prosthetic in the United States.

more...

Veneers Market Analysis | United States | 2018-2024 | MedCore

Veneers are very thin shells of restorative material that are made from porcelain or composite resin. They are bonded to the surface of the damaged tooth to repair or improve aesthetics. Veneers can be placed on teeth with minimal preparation and drilling compared to other prosthetics procedures, as well as minimal or no local anesthetic.

more...

Denture Teeth Market Analysis | United States | 2018-2024 | MedCore

The denture teeth market represents individual artificial teeth that are used in manufacturing dentures. On average, 14 denture teeth are recruited for a full denture whereas 5.7 denture teeth will be integrated into a partial denture. However, individual cases may vary. It may be useful to note that the total denture teeth market also encompasses teeth used in implant-based overdentures.

more...

Crowns and Bridges Market Analysis | United States | 2018-2024 | MedCore

Crowns and bridges are custom-designed hardware made from metal alloys and/or ceramic materials to restore tooth structure and are the most common prosthetic device used in dentistry. A bridge consists of multiple crowns and at least one pontic, which is a tooth-like device held in place by adjacent crowns.

more...

Dental CAD/CAM Prosthetics Market Analysis | United States | 2018-2024 | MedCore

Computer-aided design/computer-aided manufacturing (CAD/CAM) blocks and pucks are materials that are used for producing prosthetics including crowns, bridges, inlay/onlays and veneers. The blocks are manufactured specifically for use in CAD/CAM milling systems. The number of prosthetics generated per block depends on the prosthesis. Originally, blocks were intended to either produce a single unit or a three-unit bridge. In order to make the most out of the blocks, dental labs began to mill three units out of a three-unit bridge block. As such, a variety of block sizes and even pucks emerged onto the market. Typically, one block is used for one crown unit but this may vary on a case-to-case basis. Larger discs, on the other hand, are capable of generating multiple crowns and bridges per unit.

more...

Denture Market Analysis, Size, Trends | Global | 2018-2024 | MedCore

Industry Trends Growth of the denture market is dictated by a couple of factors, including the aging population. The elderly population in the United States consists of the largest demographic of edentulous patients. As such, growth of the elderly population will increase the potential volume of patients for denture procedures, thereby stimulating market growth. In

more...

Computer-Guided Surgery Market Size, Share & COVID19 Impact Analysis | United States | 2021-2027 | 2 MedCore | Includes: Dental Treatment Planning Software & Dental Surgical Guides

In 2021, the U.S. computer-guided surgery market size is projected to reach $40.5 million, with the surgical guide market showing the fastest growth. The total U.S. market size is expected to grow over the forecast period to exceed $68 million in 2027. In the U.S, the target market for treatment planning software and surgical guides

more...

Dental Implant Instrument Kits Market Analysis | United States | 2017-2023 | MedCore

Dental implant procedures involve the use of a variety of instruments, which are available in kits that contain all the instruments needed to place a particular brand of implant. These kits are sold by the same companies that manufacture dental implants and are specific to a particular brand of implant. Many dentists use multiple kits on an annual basis such that they are able to clean and autoclave kits in between surgical procedures. This is especially true for specialists whom tend to place more implants than the typical general practitioner. Common instruments found in kits include drills, reamers, ratchets and implant inserter/retrievers. While most of these components can be reused, drills must be replaced after every 10 to 50 implant procedures. How often the drills are replaced depends on the user and the type of cases performed. Some companies offer drills separately at a lower price than that of a complete kit.

more...

Dental Barrier Membranes Market Analysis | United States | 2021-2027 | MedCore

Barrier membranes are a critical component to regeneration therapy and are aimed at restoring the form and function of the mouth. Commercially available on the market, barrier membranes function in dental surgeries to help retain bone grafting materials, to exclude epithelium and connective tissue from entering into sites of desired bone and ligament regeneration, or for the combination of these reasons. Whether restoring lost bone around teeth or implants, or in larger areas of the jaws affected by trauma or disease, too often there is inadequate gingival tissue to cover the membranes, leading to membrane exposure, extensive membrane contamination and procedural failure, which is unacceptable.

more...

Dental Growth Factor Market Analysis | United States | 2021-2027 | MedCore

Dental growth factor and tissue engineering products is a broad category that encompasses products used for facilitating and enhancing bone regeneration. This includes growth factors and enamel matrix protein solutions. Platelet rich plasma (PRP) is also used for these purposes, but will not be considered within this report.

more...

Cone Beam Computed Tomography Market Size, Share & Trends Analysis | Europe | 2019-2025 | MedCore | Includes: CBCT Scanners from Carestream, Dentsply Sirona, Planmeca, and Others

In 2019, the European cone beam computed tomography market size was valued at €165 million, with the large FOV CBCT market showing the fastest growth. With the emergence of CBCT technology, the CBCT scanner market has experienced rapid growth as the applications have expanded beyond 3D reconstructions of a patient’s facial structure to include pan/ceph

more...

Surgical Guides Market Size, Share & Trends Analysis | Europe | 2019-2025 | MedCore | Includes: Surgical Guides From Dentsply Sirona, Nobel Biocare, and Dental Wings

In 2019, the European surgical guides market size reached €35 million and is forecasted to exceed €63 million in 2026. Dentists use computer-guided surgery in one of two ways to assist them in the proper placement of implants: they either use treatment planning software exclusively or use the software along with a surgical guide. Due

more...

Treatment Planning Software Market Size, Share & Trends Analysis | Europe | 2019-2025 | MedCore | Includes: Treatment Planning Software from Dentsply Sirona, Nobel Biocare, Dental Wings and Others

In 2019, the European treatment planning software market size was valued at €16 million, with the U.K. market showing the most promising growth. The treatment planning software market is characterized by aggressive ASP declines, resulting in relatively flat growth in terms of value. Treatment planning software is a relatively costly investment that holds the promise

more...

All-Tissue Dental Lasers Market Analysis | Europe | 2017-2023 | MedCore

All-tissue lasers are systems that can be used on both soft and hard tissue in the intraoral cavity. These lasers have unique clinical characteristics that surpass conventional tools such as scalpel and drill, thus having the potential to decrease the use of such tools and to create a high-tech atmosphere around the dental chair. The minimally invasive equipment makes patients much more comfortable, increases the efficiency, and therefore the return on investment for the dentist. Even though all-tissue lasers are fairly expensive investments for dentists, the short and long term benefits can quickly outweigh the initial expenditures, making them a valuable addition to dental practices.

more...

Soft-Tissue Dental Lasers Market Analysis | Europe | 2017-2023 | MedCore

The dental surgical laser market includes all-tissue and soft-tissue lasers. Dental surgical lasers result in operational benefits to dental practices by enhancing the appeal for patients to undergo treatments using modern technology over traditional methods. Dental surgical laser technology greatly enhances dentists’ efficiency and effectiveness of treatments as well as increases patient comfort and willingness to undergo uncomfortable procedures.
Soft-tissue lasers are dental lasers that are effective on tissues surrounding teeth and can be used to contour gingiva, sterilize the intraoral cavity and minimize bleeding during procedures. These lasers turn several dental procedures into painless, comfortable and rapid operations, significantly increasing patient satisfaction. Soft-tissue lasers can be categorized into diode, CO2 and Nd:YAG lasers.

more...

Dental Barrier Membranes Market Analysis | Argentina | 2017-2023 | MedCore

Barrier membranes are a critical component to regeneration therapy and are aimed at restoring the form and function of the mouth. Commercially available on the market, barrier membranes function in dental surgeries to help retain bone grafting materials, to exclude epithelium and connective tissue from entering into sites of desired bone and ligament regeneration, or for the combination of these reasons. Whether restoring lost bone around teeth or implants, or in larger areas of the jaws affected by trauma or disease, too often there is inadequate gingival tissue to cover the membranes, leading to membrane exposure, extensive membrane contamination and procedural failure, which is unacceptable.

more...